Showing posts with label obw. Show all posts
Showing posts with label obw. Show all posts

Tuesday, August 18, 2020

Hexified Panels & OBWs--Have all panels from same bolt

Cut OBW/Hexified Panel Quilt Panels from the Same Bolt

To make a Hexified Panel Quilt you need seven (7) panels or for a basic One Block Wonder six (6) repeats for hexies or eight (8) for octagons. Having faced this issue myself with a student in a classes and also a project of my own, I've learned it is critical, if at all possible, to have all of the panels that will be cut into strips and triangle sets be from the same bolt. For Hexified Panel Quilts, having the seventh uncut panel to frame come from a different bolt is probably acceptable, but preferably not the six panels to be cut. Some differences may be subtle like variances in color saturation, while others are much more obvious with actual differences in panel or block sizes.

When fabric is produced, each run may come out slightly different. The ink saturation may vary making one run darker or more vibrant than the other. As finished fabric is run through the machine to fold and roll the fabric onto bolts, it may stretch or tweak differently by bolt. If a fabric is popular, a new printing may be done that starts with different greige goods (raw fabric before dyeing or printing) or even a different manufacturing plant. Each of these factors can make the panels or blocks vary from bolt to bolt. These issues can definitely cause problems when trying to line up your layers accurately to cut strips and sub-sets. 

I first came across this problem in 2016 when a quilter in one of my classes had purchased panels over the internet. She got three from one vendor and four from another to make up her seven panels for a Hexified Panel Quilt. What we discovered together was that the panels from the two vendors were printed differently. The width of fabric on one set was over 1" longer than the other, throwing off the alignment of the two sets of panels. The 24" panel width along the straight of grain was pretty close on both sets. We decided together to have her cut the strips across the straight of grain panel width and readjust her pins aligning layers after each cut to keep the WOF print close to the same. It was a tedious process with a fair amount of waste, but together we got all of her strips and triangle sets cut and she did eventually complete the project. 

After seeing these gorgeous Elizabeth's Studio Hummingbirds & Flowers block panels at the 2019 Spring Quilt Market in Kansas City, I ordered two bolts to cut into kits for my classes and workshops. A few weeks after Market, I received a call from the warehouse manager saying they had several partial bolts and asked if that would be okay. Not giving it a lot of thought and not remembering my experience in the 2016 class, I said I'd take them all. I soon received three bolts--one 7 yard bolt with ~10 repeats, one 11 yard bolt with ~16 repeats, and one full 15 yard bolt with ~22 repeats. I hoped there would be enough repeats to make multiple kits for future workshops.  

I pulled the two partial bolts down from the stash closet and began cutting the panels apart into four kits each--two blocks half width of fabric by one block wide. For the sample I was going to use the odd number of blocks from each bolt, making sure I didn't give anyone else the possibly difficult blocks to match up. I soon discovered that while they appeared the same, they were printed very differently. After cutting the blocks apart and starting to line up one set of six with pins, I noticed they weren't matching up at all. As a test, I folded one set of blocks in half and laid it over the same set of blocks from the other bolt and you can see the clear difference.

The light blue border surrounding the blocks was a different width between the blocks. Even the blocks were not the same size. Looking closer, the selvedge on one bolt had the light blue background going right to the edge of the fabric, whereas the other bolt had a white selvedge with the blue starting half inch from the edge. Still, the information printed on the selvedges was the same. I separated the blocks back into separate piles by bolt and had to rethink my plan. I then took down the third bolt to check it against the other two.

 
Even on the two bolts that were printed the same, the color saturation was definitely darker on one bolt than the other as you can see between the blocks on the left and those on the right. Mixing those two sets to make hexies would make interesting hexies with uneven color saturation.

There are so many ways to adapt and tweak the One Block Wonder technique and its variations. I've used repeats across the width of fabric in order to get six repeats when I only had yardage enough for three or four of the six. I've seen others use mirror image blocks, lining up right and wrong sides of fabric to match up the print, to create very unique hexies when all six layers are then laid out with all right sides up. Regardless, in my opinion, if you have two bolts that are so different as the two I received, there may be no way to accommodate this much variance. With a full size panel it can possibly be done with care as my student and I learned back in 2016; however, with the smaller blocks especially, the variance between the two bolts I received was too great to bridge. 

More snippets from the sewing room soon,

Liz

Monday, June 8, 2020

Sit-Down Quilting with Rulers--Curves

My favorite way to quilt a Hexified Panel Quilt or One Block Wonder is with gentle curves or orange peels that curve from seam-intersection to seam-intersection. Since I press the seams all open when making these quilts, stitching all those seams in the ditch would be stitching only on thread. By using the curves, I secure every seam and create a lovely quilting design that is easy to do. I've done dozens of quilts this way completely free motion where the overall quilting is perfect in its imperfections. However, my sweet husband decided he wanted his Wolves Hexified Panel Quilt quilted with a ruler so the curves would be more uniform and fill more of each triangle. So, the adventure shifted early in 2019 to using a ruler on these quilts.
I've been teaching free-motion quilting on domestic and mid-arm sit-down machines for a number of years now. As my students have improved, they've asked for advanced classes using rulers. The plan was to teach several classes this year at area shops to demonstrate and teach quilting with rulers on domestic machines or sit-down midarm quilters. The COVID-19 pandemic changed all that as I cancelled all of my classes and workshops for the foreseeable future until we see how this all unfolds. I've considered doing an online class or Facebook Live, but haven't managed to make that happen yet. We shall see what the future holds in the way of classes--either live or online, but in the meantime we are playing with short videos taken with my camera to share.
I quilt on a HandiQuilter Sweet Sixteen sit-down midarm. The machine slides into a custom table that, with the extensions, is 6 feet long by ~30" deep. I have craft tables set on either side of my chair, tucked just under the edges of the table that carry the weight of the quilt as I shift it around. This allows me to keep the quilt "pooled" on the U-shaped nest and prevents the quilt from falling off the table and creating drag. I have quilted everything on this machine for the last almost 8 years from little 6x8" mug rugs to a huge 112x121" king size quilt with no problems. It just takes getting used to and focusing on the section you are quilting at the moment so as to not get overwhelmed by the larger projects.

Here's a link to a video (that Blogger says is too big to upload) that Les took today of me in action on my machine, quilting curves on a Hexified Panel Quilt using a ruler. I talked through some of the steps I take in holding the ruler, creating tension with my hands to keep the quilt layers flat, and more. It's linked to my Facebook page which I hope everyone can access. Be sure to follow me while you're there!

Now to add some additional illustrations and tips to expand on the information in the video.

While quilting curves on one of our Hexified Panel Quilts today, I was using the little 4" Arc by Westalee/Sew Steady. The triangles I was filling measure 2" from point to flat side within each machine pieced kaleidoscopic hexie. The 4" arc curve is acute enough to fill these triangles nicely. On some of my earlier Hexified Panel Quilts that had larger triangles, I preferred the Kelly Bean ruler by Kelly Cline Quilting that has a somewhat gentler curve. There are many options out there, so find the one you like for the project you're quilting. Be sure to have some sort of non-slip sticker or adhesive product on the back of your rulers. You don't want them to slip and slide while quilting, as they should be moving with the quilt as you move them together along the quilting foot. These have True Grip self-adhesive circles or leftover pieces from the sheet of circles that are designed for quilting rulers. The rings are die-cut on a full sheet of the self-adhesive rubber, so when the rings are all used, be sure to cut up the leftovers! There's enough extra to use on several more rulers. Also, always set your needle stop in the DOWN position when quilting so when you stop, the needle stays down in your quilt to hold it in place. If you leave it in the UP position, when you let go of the quilt after you stop, the quilt will likely shift and create a jump-stitch when you are ready to begin stitching again.
Before you start on a project, do enough practice with your ruler to know what speed you like to work at. I prefer to work at about 40% speed on my HQ Sweet Sixteen. As you can see from this picture, I have my presets on my machine set at 25%, 35%, and 45%. Depending on what I'm quilting, I can adjust up or down from there, but only on very rare occasions do I go beyond that 45%. I've found the speed that I'm comfortable with and stick with it. I find that when I set a specific speed, I can quilt "pedal to the metal" and not have to keep my leg/ankle in a constant state of tension trying to find and hold a specific speed. For those with midarms or even modern domestics that have a speed control, set it to a speed you're comfortable with so you can just put your foot down and go. 
Yes, there's a little 2" thick photo album under my heel. I have found that even when quilting flat out, having my ankle flexed causes a lot of tension and strain in my leg by the end of the day. By elevating my heel I'm pressing down with my foot, letting my calf/leg stay more relaxed. It's definitely easier on me than having my heel on the floor and my foot angled up to press down. It's a little thing, but whatever you can do to make yourself comfortable for hours of quilting will help you enjoy the process more in the long run.
Here you can see me holding the ruler snugged up close to the closed quilting foot, spaced about 1/4" from the intersections I want to intersect with my stitching. You have to remember that the space between the edge of your ruler and the needle centered in that foot is 1/4", so you have to take that into account when placing your ruler to get the stitching where you want it. When you turn the ruler around to stitch along the next seam, be sure you stop at the intersection, keeping your hands and the ruler firmly in place, until you have completely stopped and taken your foot off the pedal. The needle may take one more stitch in place as it resets to the needle DOWN position, so don't be in a hurry to move your hands. Once you've repositioned the ruler, you are ready to go again, holding the ruler firmly in place and giving a little tension to the quilt around where you're stitching with your hands to prevent any ripples on the back and to ease the layers into the space you're quilting.
When quilting gentle curves/orange peels, I prefer to stitch long rows of curves that alternate direction. I will follow those long straight seams, alternating my curves from point to point, for as long as I can across or around the quilt. These rows can be done in such a way as to quilt an entire quilt with as few as 3 or 4 starts and stops. Along each seam there will be a curve on each side of it creating the melon shape. Three long rows of curves create all of the quilting, with two runs along each line--quilting S-curves in one direction and back the other way to complete the melons. Once all three rows have been quilted along the seams, they create these stars or flowers within each pieced hexie.
This view lets you see the same quilting design from both sides. The front of the quilt shows the stitching, pausing at each intersection along the seams to move the ruler back and forth to create the long S-curves, ultimately creating the 6 melon shapes that create the star. From the back, you only see the stars or flowers as an all-over design. Can you pick out the row(s) that still needs to be quilted? Yes, it's not completely done. There are a variety of ways to quilt orange peels, but after trying several, this is my favorite.

I hope this has been helpful for those who want to learn to quilt the orange peel/gentle curves on their OBWs or Hexified Panel Quilts. Please don't hesitate to message me or post questions if you'd like more information!

More snippets from the sewing room soon,
Liz

Tuesday, December 3, 2019

Part 1: Tips for Hexified Panels/One Block Wonders

Tips 101: Layering and Cutting Strips

I've have spent the last couple of weeks rewriting and updating my Hexified Panel Quilts pattern. As a result, I find there are loads more tips and tricks that could be helpful to those making Hexified Panel Quilts or One Block Wonders. Having made over 30 Hexified Panel Quilts and/or One Block Wonders, it seems appropriate to share some of tips that are helpful to know when going through the process of making these one-of-a-kind quilts. From layering and cutting your strips, to cutting the triangles, to assembling them into the units ready for design, there are numerous steps that can make or break your success, as well as test your patience. This series of tutorials is meant to help you through some of those steps and make the process easier and smoother.

It has been nearly ten years since I made Strutting Peacocks, my first One Block Wonder. Oh my, how much I've learned since those early days!

Cutting your panels

The first thing I've learned is imperative to making a successful OBW or Hexified Panel Quilt is to be sure all of your panels were cut from the same bolt. Several times at workshops I've had students come in with panels they purchased on the internet, 3 panels from one vendor and 4 from another. Invariably, the panels from two different bolts do NOT match up properly and can cause a number of problems. Not realizing I would have a perfect example just hours before writing this, I had planned to just explain why it makes a different.
However, as I was cutting panels for a sample last night, I only had four on the end of one bolt and went to the closet for a fresh bolt to cut three more. Since I had ordered from the same company on the same day, I presumed they would work together just fine. However, they were obviously quite different! If you look at these two panels--one folded and placed on top of the other, the selvedges on the right are quite different, and the blocks themselves don't match up. Also, the colors on each are enough different that it would be obvious if I combined three from each in a single hexie. The first bolt was quite vibrant, while the second bolt was a little more washed out. Once I discovered just how different they were, I cut 3 more from the new bolt and set the four orphans aside for another project. Just like checking that all skeins of yarn for a project are from the same dye-lot, purchasing panels from the same bolt holds true for similar reasons.

For those using full width of fabric panels, rather than wrangle 44" long strips and try to keep them aligned, I cut the panels in half at the fold before I start. Our most common rulers are only 24" long and our cutting mats typically no longer than 36", so trying to cut a 44" long strip is awkward at best! Working with two stacks about the size of fat quarters makes it much easier to handle, and the 22" WOF strips are easier to keep aligned as well. There has been much discussion about the loss of extra hexies when doing this; however, you will only lose one hexie per strip, which isn't much in the big picture. A 24x44" panel cut at 2 3/4" can yield ~12 sets of triangles per 22"/half-WOF strip. Multiply 12 sets x 8 strips across the 24" panel and for just half of your panel you get 96. Double that for both halves of your full WOF panel and you get 192 sets of triangles! Losing 8 sets by cutting the panel in half is minimal waste and makes the process so much more manageable! 

When pinning, I prefer to add my pins oriented long-ways along the long edge of the panels, using only flathead pins. The flathead pins make it easier to place your ruler down on top of them, without causing the ruler to rock as it might when placed on top of pins with round heads. I typically cut my strips width of fabric as there is just a hair of ease when stretched, whereas there is no ease along the length of grain. I've found that little bit of ease is very useful when assembling your units into rows as bias edges of some triangles meet straight edges on other triangles in the assembly process.  
Overall, I've had good luck using minimal pins--sometimes only 2 or 3 along one edge--when lining up my panels; however, these blocks, once all layers were cut from the same bolt, still gave me fits. I lightly sprayed every panel with water and pressed them to get the creases out that they had developed while rolled on the bolt. Even then, two layers in particular were stretched more than the others and resisted laying flat and staying aligned. I ended up using multiple pins across the fabric and down both edges and, spraying the stack lightly from the wrong side (pins down on the board), I re-pressed the stack as a whole while pinned to get them to behave. With a little extra encouragement (and patience!) I was able to get them lined up, removed most of the pins, and trimmed one long edge back to where all six layers were all even. I chose a spot ~1/4" from the edge of the block frame so the frame background would be hidden in the seams. 
I then measured from that cut edge, across the narrow width of the panels, to find out how many usable inches I had to work with to cut strips. I don't trim the opposite edge of the panels as any extra may be needed to assure all strips can be cut without the last one being short. I chose 11 1/4" as my usable amount and began dividing by various possible strip widths until I found a measurement that would give me the most number of strips with the least amount of waste. In this case I could get 5 strips cut at 2.25" and the little bit left untrimmed on the left side would be enough to assure I got all five strips at their full width.

NOTE: When cutting fabric, there will always be bits of fibers left over, similar to the sawdust left behind when cutting lumber. Even if you cut each strip accurately, the placement of your ruler and any twist, as well as the width of the blade, can cause a fifth strip to possibly come out short. For example, if I have exactly 8" of usable fabric with no remnant and want to cut four 2" strips, I will choose to cut 1 7/8" or slightly less per strip to give myself a little leeway. Leaving the extra on the untrimmed opposite edge, gives me a little space for minor errors without shorting the final strip. 
To begin cutting and being right handed, I turn my stack of six layers around so I can use my ruler to accurately measure my 2 1/4", using a piece of rubber shelf liner under the ruler to help prevent shifting. I proceed across the stack, cutting rows until I'm at the far edge where the small amount of leftover will be trimmed away. The first strip was trimmed and set aside before the rest of the strips were cut, so the second picture shows only four of the strips and the leftover waste. 

As each row is cut, I double check to be sure the print is still aligned nicely across the strip on all six layers. As long as they are very close, I don't worry about small anomalies as they won't be noticeable once the triangles are cut and assembled. Remember, these are triangles, so the print won't be matching up on triangle edges as they might on square piecing.
At this point you're ready to cut your triangles, which moves us on to tutorial Tips 102 for Hexified Panels/One Block Wonders.

More snippets from the sewing room soon,
Liz

Saturday, August 25, 2018

Hexified Panel Quilt Workshop Retreat!!!

with teacher Liz Granberg-Jerome 
of Gypsy Dreamer Quilts
Friday-Sunday, November 9-11
118 S. Main St., Spring Hill, Kansas 

Join Liz Granberg-Jerome of Gypsy Dreamer Quilts for a full weekend workshop retreat of creating Hexified Panel/One Block Wonder variation quilts at The Creative Place in Spring Hill, Kansas! Liz, your personal teacher, will be guiding you through the process from start to finish. Get hours of hands-on instruction and support as you create your own beautiful art quilt with your teacher by your side. There will be lots of “teaching moments” throughout the weekend as Liz floats around the room offering advice and assistance as needed. You will work on layering and cutting your panels, sewing units together, and creating your own unique color-flow layout during the free sew hours. 
Download your registration form and send it with your deposit check today to reserve your space!

Check in between 3pm & 5pm on Friday, Nov 9. Check-out on Sunday, Nov 11 at 2pm. Meals provided include a light supper Friday & supper Saturday, brunch Saturday & Sunday. Bring a favorite snack to add to the munchies table for snacking between meals and late into the night. Limited space available so sign up today!

Your personal teacher, Liz Granberg-Jerome, owner of Gypsy Dreamer Quilts, will be guiding you through the process from start to finish. Gain inspiration from her quilts and her instruction throughout the weekend. Liz and her husband Les have made over 30 Hexified Panel Quilt/One Block Wonder variation quilts, two of which were published in One Block Wonders of the World book by Maxine Rosenthal and Linda Bardes, as well as three sample quilts made as guest quilt artist for Timeless Treasures Fabrics.
 
Check in between 3pm & 5pm on Friday, Nov 9. Check-out on Sunday, Nov 11 at 2pm. Meals provided include supper Friday & Saturday, brunch Saturday & Sunday. Bring a favorite snack to add to the munchies table for snacking between meals and late into the night. Limited space available so sign up today!
 

Cost:
Overnighters $225 ($100 deposit) limited to 12.
Commuters/Day-trippers $125 ($50 deposit) limited to 5.
Deposits due by Sept 29; full payment due by October 27.
Cash or check only.
 
The Creative Place has a full kitchen with refrigerator, stove, etc. Please bring items for any special dietary needs you may have. Please also bring your favorite snacks and beverages.

Sleeping arrangements at The Creative Place are dormitory style with twin beds and individual lockers for each overnighter. Bed linens and pillows are provided but feel free to bring your own pillow! Two full baths (walk-in showers) are available (one is fully ADA compliant) and towels (bath, hand, washcloths) are provided with soap and shampoo in each shower. 
 
For more information about and photos of the Creative Place accommodations, be sure to check out their website.